Fighter Router. Overview of the Tenda AC7 Dual Band Wi-Fi Router

Introduction

It was a nervous evening at home when I had to quickly upload a couple of dozens of large-sized files to think about buying a new router. The old router only had 2.4 GHz + unstable LAN port access. In the evening, after work, the 2.4 GHz broadcast is overloaded on all channels, I did not want to mess with the wires – everything has been connected “over the air” for a long time. The next two days (the benefit was a great weekend) were spent on a search for a new intermediary between the Network and the person)). The solution was the Tenda AC7 dual-band router – a “fighter” at a convenient price.

I will give the most significant characteristics, we look at the rest on the official page:

  • 1167 Mb / s (5 GHz – 867 Mb / s, 2.4 GHz – 300 Mb / s);
  • end-to-end VPN;
  • IEEE 802.11ac / a / n 5 GHz, IEEE 802.11b / g / n 2.4 GHz;
  • WPS
  • IPTV;
  • control from a mobile device;
  • Bearmforming +
Packaging and appearance

They brought the device in a dense cardboard box, with the main technical characteristics printed with vivid graphics. There was also a QR code for quick access to installing the Tenda WiFi mobile application. But first things first.

The layout inside the packaging box is tight, but getting a separate power supply unit is not difficult. The set includes a PSU (suitable for both old, Soviet times, sockets, and for Euro-standard sockets), a meter-long patch cord in gray and a block of documents (instructions, warranty card and other charms). The hero of the review is neatly packed in polyethylene.

The filling of the router is completely dressed in black matte plastic. Design – “fighter” features and broken aggressive lines. The upper, lateral and lower sides – all in a neat perforation for passive removal of heat generated. It must be said that under pressing the perforated areas do not even think of succumbing to deflection.

Front panel with bright indicators. The glow of “bulbs” can be turned off at any time from the admin panel or from a mobile application.

Recommended
Comics and Graphic Novels that every fan of the genre needs to read

The back side is visually divided into two areas. The first one has a power connector, Wi-Fi power buttons and WPS / Reset control. Immediately WAN (painted in blue). On the second visual half are three yellow LAN ports. All ports are 100 megabyte, IPTV connection is possible. On the same panel are three external antennas that are deployed in any direction. To remove and replace the antennas with more powerful ones or if they fail, it just doesn’t work out – they are non-removable. Another additional antenna is placed on the left and right sides of the device.

About impressions about clothes at the end, and now about the most important thing, about work and its setting.

Administration

I connected the device directly to the provider’s internet cable. Following, a complete twisted pair to a PC. The power supply to the network, press the power button, a couple of seconds of waiting – and you can administer. Looking ahead – the power supply did not make a single sound during operation, the heating to a state of barely warm.

First of all, when you enter the web-interface, we are asked to indicate the type of connection. I have a dynamic IP. I select and go to the WiFi setup item. We indicate the transmitter power, network name and passwords. In the future, all the initial settings can be changed at any convenient time.

After successfully setting the basic parameters, we go to the main menu. It is fully Russified, there are no translation errors. First I checked the firmware update. There is. It took about one minute to update and reboot. After the update, everything worked without problems.

The main window contains basic information: Internet connection, wireless networks, number of connected devices, USB connection. The connection speed and external IP address are also indicated. The next item is the Internet settings. Standard required settings.

In the settings for wireless Internet access from interesting settings I note:

Recommended
The Pixel 6 would refuse to charge with some cables of too poor quality

1) the inclusion of the work of WI-Fi networks on a schedule. Go to work, the wireless network is automatically turned off. Come – wi-fi is automatically configured. As extra security – fine.

2) repeat the already created connection. Using a router as a repeater.

3) power control of each range separately. Three gradations are available.

4) inclusion of Beamforming +. An interesting technology, thanks to which the signal is concentrated directly on the receiving device. The result is high speed and maximum signal reception.

Creating a guest network. It can be limited as a range (set only 2.4 GHz), access speed, network lifetime.

Parental control. We block access to the network at a specific time for each individual device, enter unwanted resources in the black list. The child coped with homework – gained access to social networks or game servers. And strictly at a certain time.

VPN The item is as simple as possible in the settings. The router only works with PPTP and L2TP connections. Of course, I want to see work with OpenVPN here, but – that is, that is.

Additional settings include a lot of interesting things. For example, with the help of bandwidth, you can configure the speed for each connected device. This is convenient. To comrades who cut speed with P2P applications, distribute the speed minimally, and to everyone else – the maximum. Further. You can enable control from a mobile application. Specify the sleep time. Configure the built-in firewall. Configure IPTV operation. Raise the built-in server indicating any port and IP address.

And the last one is the system settings. We work with LAN, deal with backups, look at system logs, get remote access to settings. I brought the most basic, additional settings items are indicated on the screen below.

Settings are set, there are no problems with operability. It’s time to test the possibilities.

Testing

1) Speed ​​on LAN ports. The measurement was carried out using the program “LAN Speed ​​Test v.4.4” (free version), three times, with the browser closed and the bittorrent client. The results are shown on the screen below.

2) Measurement of wireless network speed. For the sake of the purity of the experiment, the time was selected with a minimum load of bands and channels (Tuesday time around 11.00). All measurements were carried out using the famous Internet resource SpeedTest. The client was a laptop with an integrated Intel 9560NGW card.

Recommended
Xiaomi AX3600 WIFI 6 The confirmed router will be revealed on February 13
findings

For home use, the device is perfect. The necessary hardware and software capabilities are. The speed of information exchange with the global web is fine. The previous router could not give out half. A few words about security. The built-in firewall copes excellently. I tried to make a flood attack with icmp packets. After a second, the connection of the attacking machine with the router was disconnected. Inside the technology no longer climbed. In addition to the firewall, we take into account the inclusion of Wi-Fi on a schedule, the sleep mode of the router. No network – no way to connect to it. Due to Bearmforming + I get high speed and high reception level on any of the connected devices.

The exterior design is for everybody. I’m called, it’s ok 🙂 The router spent the first week on the desktop, near the PC, and later hung it on the wall. Yes, being on the table, the Tenda router did not slip. There are four large rubber legs on the underside. Disabled operation completely. The diodes are bright, at night they gave reflections on the floor, annoying.

A person far from the world of IT-technologies can cope with the settings. You can generally specify only the type of connection, give a name to the wireless network and set a password. And there is Internet access.

Related Articles

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker. Thanks.