Lorex 1080p wireless camera system review: connectivity issues drowned …
I really want to like the Lorex Wireless Camera System (Model LWF2080B-64), because it removes a couple of weak spots that I repeatedly encounter with home security cameras.
This takes care of the first, high cloud subscription fees for storing video clips, by including a high-capacity network (1TB) DVR that can hold up to six cameras (four in this special package), so you can manage storage locally. This mitigates the latter with a battery-powered, wireless, and battery-powered 1080p camera, giving you the difficult task of moving power and video cables through the walls of your home. Unfortunately, these services are debated by an application, so mistakes make the system useless.
On paper, the wireless camera system is an attractive option for people who want a turnkey solution to monitor the perimeter around their home. In addition to the DVR and camera, it is equipped with a wireless receiver, batteries for each camera, and cabling and hardware to configure everything and get it up and running.
Each bullet camera has a 140-degree field of view, passive infrared motion sensors, microphones and speakers for two-way conversations, and infrared night vision up to 150 feet. The camera housing is made of aluminum to resist natural and human-induced harassment and is IP66 rated, proving that they are dustproof and protected from high pressure water jets at the nozzles. 12.5 mm.
The DVR supports up to six channels, so you can add two more cameras to handle the supervised area. Although a 1TB hard drive must offer enough space to store video clips that shoot with months of movement, you can replace them with larger ones, up to 6TB.
Easy installation, pathetic performance.
Although the amount of hardware involved can be intimidating, installation is fairly easy. First, prepare each camera by installing a pre-charged lithium-ion battery and installing an antenna. Then you need to connect a pair of antennas to the wireless receiver and connect the receiver to the USB port on the back of the DVR. You can connect the receiver with tape or double-sided screws to increase its range, even if it is limited by the relatively short length of the receiver cable.
Then you need to connect the DVR to the ethernet port of your router and plug in the power supply. If you only plan to view camera feed through Lorex companion app, you can stop here. Lorex also gives you the option to monitor the camera on a computer or TV monitor. To activate it, you must connect one of these devices using the HDMI or VGA DVR port and connect the supplied mouse to the front of the DVR.
Finally, you will connect the DVR with the Lorex Cirrus app (the camera is pre-installed) and install the camera in your home. Lorex supplies screwdriver shanks and bits for this last task.
Although setting up the camera is not a hassle, using it is not at all. I experienced problems immediately after installing the first camera. It beeped indicating that the battery was on after inserting it, and a few seconds later I received a motion detection warning on my phone, which was triggered by the handling of my camera.
There is no image on the camera channel in the app. I closed and reopened the app several times with no changes, although I kept getting motion detection warnings.
I added three other cameras and got the same result: motion detection active, but empty sources across the board. Over time, one or two feeds will magically appear in the app, only disappearing when you touch them to see the live view.
The installation guide offers various troubleshooting solutions for “no image” problems: check that everything is connected correctly, reposition the camera, etc. —But none of these steps solve the problem. A small independent study revealed that my experience was unprecedented. Filling Reviews of a star for the Lorex Cirrus app The Google Play store details issues ranging from connection failures to playback issues and app freezes, as well as some disappointing experiences with Lorex customer support.
It’s a shame because this app seems to offer a number of useful cellular features, including adjustable activity zones per channel, motion detection settings, video clip length, and recording schedule. And, as I mentioned before, motion detection works quite well.
Without an app that can be used, I can only monitor camera feeds on my TV. Like all DVR interfaces, browsing is a clumsy experience that relies on the use of a computer mouse and remote control for input. More critically, that means I can only access the security system when I’m at home, which effectively defeats the purpose of having one.
It goes without saying that the Wire Free system is a major disappointment. The problem could be just an app update or a firmware repair, but that’s a great comfort if you’ve already invested $ 500.
Considering my test and other well-documented user experience, we cannot recommend the Lorex 1080P free camera system under current conditions.
Note: When you buy something after clicking the link of our item, we may get a small commission. Read our affiliate link policy for more details.